Custom-Ebike

K&S TECHNOLOGIES UNIVERSAL SEQUENTIAL LED MARKET TURN SIGNAL LIGHTS

  • Sale
  • Regular price $65.00
Shipping calculated at checkout.


K&S Technologies Universal Sequential LED Market Lights 

These lights move in a sequence from in to outside, creating motion that makes your bike very visible when turning.

Available in Clear or Smoked Lens.  Sold raw wires in one pair.  Plug and Play kit includes two pairs (front and rear) fully wired. Allow 2 to 3 weeks for delivery of kits.

SUPER72 NB Power Motor Modders: These can easily be connected to the optional light wiring harness. You will need to run a little wire to hook up the front ones into the harness. Note that they are designed for use without a flasher. They will still work, but the sequence will start with each flash. You can bypass the flash if you want. Never cross bare wires.

OPTIONAL: PLUG AND PLAY BATTERY TURN SIGNAL KIT.

Plug and Play turn Signal Indicator Kit for Super73 R, RX, S2, and ZX MotorBikes.  Add the plug and play battery kit to these turn signals! Kit includes:

  • FRONT and REAR Turn Signals
  • Pre-made wiring harness with black Techflex cable looming.
  • Turn Signal Switch for Handlebar

Indicators are powered by a 3000mAh battery. The switch mounted on the handlebars functions : up is right and down would be left.

Upgrade to a 6000ah battery with USB available.

We do NOT ship batteries outside the continental USA. Contact us if you want to order a kit without a battery.

SIMPLE INSTRUCTIONS FOR THIS KIT:

1. Attach the bolt-on battery box where desired. Mounts to water cage area or similar M5 tap out locations on most bikes. Use the two small holes in front of the bike to insert an allen wrench. Use the long holes to insert two small M5 bolts and attach box to frame.

2. Plug connection into battery.

3. install turn signals where desired and connect to battery connector (Yellow Plug Ends).

4. Zip tie wiring to frame. IMPORTANT: do not allow wires to hang or dangle where they can be caught in moving parts!

5. Install turn signal switch where desired on handlebars. Conventional arrangement is up/top/forward facing position = right turn and vis versa.

6. Power battery on and test! Signals will display more rightly with a full charge.

Enjoy!


MOUNTING  OPTIONS

If you have and R, RX, S2, ZX the rear kit works with your bike.

If you have an RX with the stock headlight and headlight fairing the front & rear signals fit your bike.

If you have an R, S2 or ZX with an aftermarket headlight that uses fork mounting brackets with holes, the front & rear kit work with your bike.

No mounting brackets included, the lights are intended to mount on existing headlight hardware and rear hole cut outs for models listed. To mount on the forks of an S2, you can purchase our #2 Bracket for mounting turn signals to forks. If you want to lower the position to the forks on the RX, purchase the #1 Bracket. These will also mount easily on MER panniers for Super73 S-2, the MER RX or S2 racks, or our custom aluminum fairings!

Indicators are powered by a 3000mAh battery. The switch mounted on the handlebars functions : up is right and down would be left.

We do NOT ship batteries outside the continental USA. Contact us if you want to order a kit without a battery.